The key decisions
- Choose the construction route before matching a decor.
- Compare total thickness, wear layer and backing separately.
- Treat herringbone as a format and configuration discussion.
Start with the construction
Standard SPC is the starting point for a rigid-core floor without attached backing. JOYFUL’s specification page lists SPC thicknesses of 4, 5 and 6 mm, wear layers of 0.3 and 0.5 mm, and a 1220 × 183 mm plank size. These fields help you describe a requirement; they are not a promise that every possible combination is available.
When comparing alternatives, keep each configuration on its own line. A single description should identify the SPC thickness, wear layer, plank dimensions, backing, locking system, surface and edge requirement. This makes it easier to understand what is actually being compared.
When attached IXPE is part of the brief
The SPC-with-IXPE route adds attached IXPE beneath the SPC construction. The published specification table lists 1.0 and 1.5 mm backing thicknesses. Clarify whether a stated thickness describes the SPC itself or the complete assembly including its backing.
A backing preference and an acoustic result are different pieces of information. If sound performance matters, review evidence for the proposed assembly rather than assuming that every attached-backing product performs the same way.
Define herringbone as a project requirement
Herringbone introduces a layout and format decision. JOYFUL’s current published baseline is 600 × 120 × 5 mm, without attached backing, with 0.3 or 0.5 mm wear-layer references. Requirements beyond that baseline need a project-specific review.
Discuss the intended layout alongside construction, locking, surface and edge details. A room photograph or a preferred decor cannot establish that a particular herringbone combination is available.
Finish with a short, complete brief
Add your market, intended application, order volume and target timing. Include a decor reference if you have one, and list sample or document needs. If a field is undecided, leave it as a question for review.
The aim is a shortlist that can be discussed clearly: one construction, one set of requirements and a visible list of open decisions. Final configuration and commercial terms are confirmed through quotation.
Continue exploring
Compare published specificationsExplore SPC product routesPrepare an RFQ